M1000 Series Signal Conditioning |
| Number of Channels: |
6-(1000-6) or 12-(M1000-12) or 24-(M1000-24) |
| Signal Inputs: |
7 pin lockable DIN. (Other types available
to order) |
| Digital Monitor: |
Dual range LED display shows channel number,
calibration input and voltage output for each channel. |
| Calibration: |
±1mV through ±10V continuously
variable (Four switched ranges with fine interpolation control). |
| Transducer power supply: |
3-12 V D.C. in 1V steps.
The bridge supply may be de-energised using the On/Off toggle switch. |
Output Conditioning (M1000-24
only):
(See Below) |
The M1000-24/P has an output
conditioning section (accessed by a hinged cover on top of the cabinet,
which accepts various post-conditioning cards. e.g. active filters,
inteqrators, power amplifiers etc.
If this section is not used it is necessary to fit Channel Compensation
Cards type M1088-P to route the voltage and current outputs through
to the rear panel connectors.. |
| Signal Outputs: |
Standard: 15 pin 'D' connectors (M1000-6 and M1000-12).
25 pin D’ connector (M1000-24/P)
Optional: BNC
Special: As required subject to space limitations |
| Power Supply: |
115/230V 45-440Hz by voltage selector on rear
panel (Optional 12V.24V D.C.) |
| Power Consumption: |
M1000-6 20VA
M1000-12 25VA
M1000-24 30VA |
| Operating Temperature: |
0°C to 40°C |
| Storage Temperature: |
- 20°C to +70°C |
| Dimensions (M1000-6): |
Height 95mm Width 135mm Depth 245mm .
Weight 2.5kg. |
| Dimensions (M1000-12): |
Height 95mm Width 265mm Depth 250mm .
Weight 4kg. |
| Dimensions (M1000-24): |
Height 95mm Width 480mm Depth 320mm .
Weight 10kg. |
