M2000 Series Data Recorders |
Specification |
| Mainframe |
|
| Number of Channels: |
8 or 16, can be increased by mix of analog
and l6ch digital boards. |
| Recording Technique: |
Thermal array, direct writing, high resolution
black on white permanent record. |
| Paper Loading: |
Drop-in roll, no threading. |
Paper Size:
(Roll) |
M2000 Width up to 216mm (8.5)
Length 30m (100’) or 60m (200’)
M2200 Width up to 155mm (6”)
Length 40m (130’) |
| Record Length: |
Selectable in seven steps from 10cm to continuous. |
| Chart Speeds: |
24 speeds from 0.5mm/hr to l0m/sec in real
time and/or storage mode. |
| Channel Configuration: |
All channels with full paper width overlap
or switch selectable to 4 or 8 parallel tracks. |
| Bandwidth: |
DC to 10kHz (Up to 80kHz sampling/channel). |
| Event Marker: |
Underscores text for duration of event. Operated
from front panel or remote contact closure. |
| Grid Lines: |
Selectable from front panel. Off, 1cm grid,
1 cm grid plus 2mm fine grid. |
| Memory: |
128 Kbytes per channel, (12 bit ADC), standard.
Extendable to 512 Kbytes. |
| Trace Viewing |
: Integral, high resolution LED array provides
visual presentation of all channels. |
| Test Annotation: |
Time, date, run number etc., automatically
printed along paper edge. (Test details can be added via the system
computer). |
| Channel Identification: |
Channel number printed at regular intervals
alongside data. |
| Memory Contents: |
Front panel bargraph status indicator. |
| Dimensions (M2000): |
Height 177mm (7”). Width 400mm
(15.75”). Depth 460mm (18”). Excluding feet and connectors.
Weight 15kg. |
| Dimensions (M2200): |
Height 176mm (7”). Width 280mm
(11”). Depth 350mm (14”). Excluding feet and connectors.
Weight 12kg. |
| Power Supply: |
115/230 volts, 45-440Hz (by voltage selector),
plus optional integral inverter for 1 2/24V d.c. |
| Consumption: |
8OVA (M2200-8). 100VA (M2000-16). |
| Signal Conditioning |
|
| Signal Inputs: |
Any type of transducer plus analog or digital
signals from microvolts through to 500V rms. |
| Digital Monitor: |
31/2 digit dual range auto-polarity display
for reading channel number, voltage output, calibration input and
trace start point. |
| Transducer Supply: |
Adjustable in lv steps between 3 and 12V D.C.
Max current: 1A. |
| Calibrator: |
Continuously variable calibration from ±1.000mV
to ±10.OOV by front panel control and digital indicator. |
| Voltage Outputs: |
All amplifiers/signal conditioners can have
optional voltage outputs via rear mounted connectors to drive tape
recorders, oscilloscopes and data acquisition systems. |
| Transient Capture |
|
| Trigger Polarity: |
Positive, negative or both (Switch selectable). |
| Trigger Allocation: |
Single or multi-channel in any mix with visual
indication of trigger state on all channels. |
| Pre-Event: |
Trigger point can be set at five separate
stations by selector switch. (Start, 25%, 50%, 75% or End of record). |
| Trigger Mode: |
Manual or alternative automatic monitoring
where unattended operation is desirable, (i.e. “baby-sit”
mode). |
| Timebase Expansion: |
Data can be replayed as captured, or expanded
for detailed analysis by a factor of up to 50:1. |
| OPTIONAL EXTRAS |
|
| |
Ruggedised Transit Case
19” Rackmount Adaptor
Hand Held Remote Controller
12/24v D.C. Operation
Microlog 2000 Data Acquisition Software
|
